Neuse Tile Service

Tile installation and service tips from professional installers

Cleaning tile, sealing grout & caulking joints

2 Comments

We had the fun of working a booth at our local Home Show last weekend, and wanted to share some common questions that visitors asked about their tile installations:

How do I clean my tile?

  • Remove soil with a broom, non-oily dust mop or vacuum. Damp mop or spot-clean using CLEAN, warm water or water and a pH neutral tile cleaner.
  • Avoid all products containing bleach or acids, as they can weaken the grout (opening the pores & causing it to get dirtier more quickly).
  • Always rinse thoroughly with CLEAN, warm water and allow to dry. When mopping, change rinse water often.
  • Shower tile looks its best when you remove excess water with a squeegee after each use and run the exhaust fan for at least 20 minutes after a shower.
  • Tile distributors sell cleaning products developed specifically for tile and stone. These specialized cleaning products generally outperform products available from large retailers.
  • For stubborn grout stains, agitate with a fiber or nylon-type scrubbing pad and a higher concentration of the pH neutral cleaning solution.

2) Should I seal my tile?

  • Many newer, high-performance grouts have a built in sealant. Ask your tile installer about the brand and type used. (Neuse Tile routinely uses high-performance grouts.)
  • While not a part of a base-level tile installation, sealers can be applied to further protect your investment. Sealers should be applied to cement-based grouts when the installation is thoroughly dry and after the initial grouting has cured at least two weeks.
  • Sealing may be necessary for natural stones and tiles like quarry and saltillo. Ask your tile distributor if your specific tile requires sealing, stripping, and resealing periodically

3) What to do with the ‘crack’ between tile and counter or tub?

The joint between the tub and tile wall and the counter-top and tile splash have the potential to separate with seasonal changes. As a house settles or the tub flexes, the grout in these joints may periodically crack.  If this happens, remove the old grout with a sharp-pointed tool. (Be careful not to chip tile or tub.) Dry the joint thoroughly, and fill with silicone sealant, available in tubes at hardware stores and in matching colors at most tile distributors. Broken or damaged tiles should be removed and replaced only by a reputable tile installer.

We are glad to be a resource for our customers and our community. And it’s just fun to #TalkTile.

Author: Neuse Tile Service

We are second generation owners of a North Carolina business dedicated to quality tile and stone installations. Since 1964, the Neuse Tile team has worked very hard to maintain the quality and integrity that have been crucial to our business' success in the Triangle area. Specialty construction trades have changed and evolved over the years, and our certified installers are truly talented craftsmen. We are proud of our work, and are committed to doing everything we can to promote the proper installation of ceramic tile, to satisfy our customers, and to run a viable business. We are honored by the trust our customers place in us and look forward to serving this area with high quality tile installations for many years to come.

2 thoughts on “Cleaning tile, sealing grout & caulking joints

  1. Good information. I will be able to share with my customers.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s